Glossy alkyd polish
BuildingIt is necessary to mix the paint well before use so that it becomes a uniform solution.
Nozzle diameter in air spray
1.2-2 mm
Nozzle diameter in airless spray
0.38-0.53 mm
Spray angle
40-80 °C
Brush or roller
It is suitable and several layers must be applied to achieve the desired thickness.
Paint thinner
Oil thinner
Wet film thickness
75-85 µ
Dry film thickness
30-35 µ
Terms of use:
Suitable surface temperature for applying paint is between 5 and 30 degrees Celsius. This temperature should be at least 3 degrees Celsius above the dew point, and the maximum relative humidity is 80%.
In such cases, the next layer may be applied after at least 24 hours.
Surface preparation:
The surface must be completely dry and free of oil and grease, dust and any other dirt and impurities.
Omid polish is based on alkyd resin and is used as a top layer in the form of a decorative and protective system for the exterior surfaces of wooden structures in construction environments. This polish is not a coating and gives a beautiful effect to the wood in the form of a clear and glossy varnish.
Product code: G100
Technical Particulars:
Hue
Colorless
Glossiness
Glossy (85-90)
Number of components
Single component
Solid percentage
50%
Viscosity
80-100 Krebs
Density
0.90 kg / L
Surface drying duration
4-5 hr
Deep drying duration
24 hr