Opaque alkyd oil paint
Building
Terms of use:
The ideal surface temperature for applying paint is between 5 and 30 degrees Celsius, which should be at least 3 degrees Celsius above the dew point, and the maximum relative humidity is 80%.
In such cases, the next layer may be applied after at least 24 hours.
Surface preparation:
For use on steel surfaces, the surface must be completely dry and free of any rust, grease and dirt, and for use on plastered surfaces, the surface must be completely strong and free of loose materials adhering to the surface.
The entire surface should be covered with Omid Primer for one or two layers.
Opaque alkyd oil paint based on Long Oil alkyd resin (Metal Oil) is used for metal, wood, and plastered surfaces (using a suitable primer). This paint is completely washable and is recommended for all interior uses of the building.
Product code: M100
Technical Particulars:
Various (according to RAL and according to customer order)
Glossiness
Opaque (0-10)
Number of components
Single component
Percentage of solid resin
At least 65%
Viscosity
80-110 Krebs
Coverage
Depending on the hue
Surface drying duration
3-4 hr
Deep drying duration
16 hr
Application:
It is necessary to mix the paint well before use so that it becomes a uniform solution.
Nozzle diameter in air spray:
1.2-2 mm
Nozzle diameter in airless spray:
0.38-0.53 mm
Brush or roller:
It is suitable and several layers must be applied to achieve the desired thickness
Paint thinner:
Oil thinner
Wet film thickness:
50-60 µ
Dry film thickness:
25-30 µ