Colours Used In Steel Structures
IndustrialApplication:
It is necessary to mix the paint well before use so that it becomes a uniform solution.
Nozzle head pressure in air spray
3-5 Bar
Nozzle diameter in air spray
1.2-2 mm
Nozzle head pressure in airless spray
120-150 Bar
Nozzle diameter in airless spray
0.38-0.53 mm
Brush or roller
It is suitable and several layers must be applied to achieve the desired thickness.
Paint thinner
Oil thinner
Wet film thickness
75-90 µ
Dry film thickness
40-50 µ
Terms of use:
Suitable surface temperature for applying paint is between 5 and 30 degrees Celsius. This temperature should be at least 3 degrees Celsius above the dew point. The temperature before operation should have maximum difference of 4 degrees Celsius with the surface temperature and the maximum relative humidity is 90%.
In such cases, the next layer is applied after at least 12 hours.
Surface preparation:
The desired steel surfaces must be completely dry and free of rust, oil and grease, dust, iron filings and any other impurities and contaminants.
The industrial paint of Omid Steel Structures Paint is a coating used on steel structures, which is produced on the basis of alkyd resin and high quality raw materials and based on standard tests and conditions. This product is designed to prevent any rust on the iron surfaces of buildings and industrial portal frames.
Product code: S25--
Technical Particulars:
Hue
Various (according to RAL and the customer order)
Glossiness
According to customer order
Number of components
Single component
Solid percentage
75%
Viscosity
115-125 Ku
Density
1.4-1.6 kg / L
Cover strength
Depending on the hue
Surface drying duration
6 hr
Deep drying duration
16 hr