Anti Rust
Building
Terms of use:
Suitable surface temperature for applying paint is between 5 and 30 degrees Celsius. This temperature should be at least 3 degrees Celsius above the dew point, and the maximum relative humidity is 90%.
In such cases, the next layer may be applied after at least 24 hours.
Surface preparation:
The desired steel surfaces must be free of grease, rust, dust, corrosion and iron filings and any other contamination.
Omid ocher primer is based on alkyd resin and contains iron oxide pigment and is used to protect steel structures against corrosive agents in the environment. This product has good resistance to moisture, water and petroleum solvents.
Product code: O200
Technical Particulars:
Hue
Ocherish Red
Glossiness
Opaque
Number of components
Single component
Solid percentage
70%
Density
1.5-1.6 kg / L
Viscosity
95-115 Krebs
Surface drying duration
45 min
Deep drying duration
3 hr
Application:
It is necessary to mix the paint well before use so that it becomes a uniform solution.
Nozzle diameter in air spray
1.2-2 mm
Nozzle diameter in airless spray
0.38-0.53 mm
Spray angle
40-80 °C
Brush or roller
It is suitable and several layers must be applied to achieve the desired thickness.
Paint thinner
Oil thinner
Wet film thickness
75-90 µ
Dry film thickness
40-50 µ