Underlay cover paint

It is necessary to mix the paint well before use so that it becomes a uniform solution.

Nozzle diameter in air spray

1.2-2 mm

Nozzle diameter in airless spray

0.38-0.53 mm

Spray angle

60-80 °C

Brush or roller

It is suitable and several layers must be applied to achieve the desired thickness

Paint thinner

Oil thinner

Wet film thickness

75-90 µ

Dry film thickness

40-50 µ

Terms of use: 

The ideal surface temperature for applying paint is between 5 and 30 degrees Celsius, which should be at least 3 degrees Celsius above the sixth point. In such cases, the maximum relative humidity is 80% and the next layer may be applied after at least 24 hours.

Surface preparation:

Surfaces should be completely dry and free of oil, salt, dust and any other dirt.

Omid underlay paint is based on alkyd resin and is used as a middle layer or liner in the form of a protection system for metal, wood and plaster structures in construction and industrial environments. It has a high coating strength and good adhesion to the alkyd primer layers (bottom surface). 

Product code: A100

Technical Particulars:

Hue

Various (according to RAL and according to customer order)

Glossiness 

Opaque

Number of components

Single component

Percentage of solid resin

At least 70%

Viscosity 

90-110 Krebs

Surface drying duration

3-4 hr

Deep drying duration

16 hr

Theoretical coverage

Depending on the hue